Radio driver

From TinyOS Wiki
Revision as of 09:10, 15 April 2008 by Brano (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Problem description

  • DMA version of the radio driver (which is the default) does not work,
  • SPI version is getting RX fifo underflows for messages larger than 10 bytes plus header,
  • using 1.2.6 version of HalPXA27xSpiPioM.nc resolves the problem, but in this version, CPU spins on slow SPI read/writes which is bad

Project status

  • problem fixed (SPI part)
  • the problem was in HalPXA27xSpiPioM.nc file: in the SSP.interruptSSP(), original code gets the length of the fifo (uiFifoLevel) from the SSSR register. but data sheet says that SSSR_FRL actually contains fifolength-1. so we have to take SSSR_RFL+1
  • DMA still does not work - maybe for the same reason?
Retrieved from "http://tinyos.stanford.edu/tinyos-wiki/index.php?title=Radio_driver&oldid=916"