T2-iMote2:Testing:May2008
All LPL apps need to be modified to allow the LPL stack to install on the iMote2
| Application Name | Pass/Fail | |
|---|---|---|
| AntiTheft: Phil (note platform-specific) | Fails, I started editing it but I get some errors. | |
| BaseStation: Phil | Blinking receive light, haven't verified serial output | |
| Blink: Vlado | Pass | |
| Null: Phil | Pass | |
| Oscilloscope: Konrad | Works, however, no visualization under windows. Can someone else verify this? | |
| Powerup: Janos | Pass | |
| RadioCountToLeds: Mike | Pass | |
| RadioSenseToLeds: Mike | Pass | |
| tests/cc2420: David M | ||
| LplBroadcastCountToLeds | Fail - Bypassed LPL not supported message, does not count up on LEDs -- Why does this fail? | |
| LplBroadcastPeriodicDelivery | Pass- Bypassed LPL not supported message | |
| LplUnicastDeliver | Pass after bypassing LPL not supported on this platform check. | |
| RssiToSerial | Pass | |
| TxThroughput | Pass | |
| TestPacketLink | Pass | |
| TestAcks | Pass | |
| tests/deluge: Vlado | Fail | |
| tests/storage: Razvan | ||
| tests/TestAdc: Jan | ||
| tests/TestAM: Kevin | ||
| tests/TestArbiter: Kevin | ||
| tests/TestLPL: David M | Pass | |
| tests/TestPrintf: Phil | ||
| tests/TestSerial: Miklos | ||
| tests/TestSimComm: Razvan | ||
| tests/TestSimTimer: Mike |
