Testing:2.1

Testing results for 2.1.

RC2

Platforms

eyesIFX

AntiTheft:

FAIL (platform not supported)

BaseStation:

PASS , but too many bad packets over the serial line
"safe": PASS

Blink:

PASS , "safe": PASS

Null:

PASS, "safe": PASS

Oscilloscope:

PASS
"safe": FAIL, starts toggling LED0 after a few seconds

Powerup:

PASS, "safe": PASS

RadioCountToLeds:

PASS,
"safe": FAIL, leds stay off (packets are not sent?)

RadioSenseToLeds:

PASS,
"safe": FAIL, leds stay off (packets are not sent?)

tests/cc2420:

not applicable

tests/deluge:

 eyesIFX not supported

tests/storage/Block:

  PASS, "safe": PASS

tests/storage/CircularLog:

  PASS, "safe": FAIL (seems to cycle after ~ 60sec with LED1 toggling)

tests/storage/Config:

  PASS, "safe": PASS

  warnings:
  /home/hanjo/tos/tinyos-2.x/tos/chips/at45db/ConfigStorageP.nc: In

function `ConfigStorageP$ConfigStorage$commit':

  /home/hanjo/tos/tinyos-2.x/tos/chips/at45db/ConfigStorageP.nc:285:

warning: assignment from incompatible pointer type

tests/storage/Log:

  PASS, "safe": PASS

tests/storage/SyncLog:

  PASS, "safe": PASS

tests/TestAdc:

   PASS, "safe": FAIL (LED2 is not turned on)

tests/arbiters:

  TestFcfsArbiter:
      PASS, "safe": PASS
  TestRoundRobinArbiter:
      PASS, "safe": PASS

tests/TestFTSP:

 FAIL (platform not supported)

tests/TestLPL:

FAIL (platform not supported)

tests/TestPrintf:

   PASS, "safe": PASS
  warnings:
      /home/hanjo/tos/tinyos-2.x/tos/interfaces/Queue.nc: In

function `PrintfP$Queue$dequeue':

     /home/hanjo/tos/tinyos-2.x/tos/interfaces/Queue.nc:81: warning:

passing arg 1 of `CNonNull' makes pointer from integer without a cast

tests/TestSerial:

  FAIL (The SF reports to have sent the packets from the host to the

mote, but no LEDs are toggled)

tests/TestSimComm:

FAIL (platform not supported)

tests/TestSimTimer:

 FAIL (platform not supported)

tests/tosthreads/apps/Blink:

  FAIL
  error:
   BlinkC.nc:39: interface Thread not found

tests/tosthreads/capps/Blink:

  FAIL
  error:
  msp430-gcc: .nc: No such file or directory

telos

apps/tests/tkn154/TestASSOCIATE

---

Pass

apps/tests/tkn154/TestDATA

---

Pass

apps/tests/tkn154/TestINDIRECT

---

Pass

apps/tests/tkn154/TestPROMISCUOUS

---

Pass README needs fixing: In README: the following lines:

  $ cd $TOSDIR/../apps/tests/TestPrintf
  $ make telosb
  $ java PrintfClient -comm serial@/dev/ttyUSBXXX:telosb

should be replaced with:

  $ java net.tinyos.tools.PrintfClient -comm serial@/dev/ttyUSB0:telosb

apps/tests/tkn154/TestSTARTSYNC

---

Pass

tosthreads/capps/Blink

---

Pass

tosthreads/capps/BaseStation

---

Pass

tosthreads/capps/Bounce

---

Pass

tosthreads/capps/Null

---

Pass

tosthreads/capps/RadioStress

---

Pass

tosthreads/capps/SenseAndSend

---

Pass

tosthreads/capps/SenseStoreAndForward

---

Pass

tosthreads/capps/TestCollection

---

Pass README needs to be fixed for the correct serialforwarder rate (57600 for telosb with threads)

tosthreads/capps/TestLogStorage

---

Pass

tosthreads/capps/TestPrintf

---

Pass

tosthreads/capps/TestSineSensor

---

Pass

tosthreads/capps/ThreadStress

---

Pass

tosthreads/apps/Blink

---

Pass

tosthreads/apps/BaseStation

---

Pass

tosthreads/apps/Bounce

---

Pass

tosthreads/apps/RadioStress

---

Pass

tosthreads/apps/TestBlockStorage

---

Pass

tosthreads/apps/TestCollection

---

Pass README needs to be fixed for the correct serialforwarder rate (57600 for telosb with threads)

tosthreads/apps/TestPrintf

---

Pass

tosthreads/apps/TestSineSensor

---

Pass

tests/TestSimTimer

---

tests/TestSimComm

---

tests/TestSerial

---

tests/TestPrintf

---

tests/TestLPL

---

tests/TestFTSP

---

tests/arbiters/TestRoundRobinArbiter

---

tests/arbiters/TestFcfsArbiter

---

tests/TestAdc

---

tests/storage/Block

---

tests/storage/CircularLog

---

tests/storage/Config

---

tests/storage/Log

---

tests/storage/SyncLog

---

tests/deluge/Blink

---

tests/deluge/Blink

---

tests/deluge/GoldenImage

---

tests/deluge/SerialBlink

---

tests/cc2420/TxThroughput

---

tests/cc2420/TestPacketLink

---

tests/cc2420/TestAcks

---

tests/cc2420/RssiToSerial

---

tests/cc2420/LplUnicastPeriodicDelivery

---

tests/cc2420/LplBroadcastPeriodicDelivery

---

tests/cc2420/LplBroadcastCountToLeds

---

RadioSenseToLeds

---

RadioCountToLeds

---

Powerup

---

Oscilloscope

---

Blink

---

Pass

BaseStation

---

Pass

TestNetwork

---

The simulation script (test.py) is not working - the nodes never find a route. You might want to customize this if TestNetwork is a part of the upcoming Collection simulation tutorial.

MultihopOscilloscope

---

When I try to run it, I am getting this error: receive error for OscilloscopeMsg (AM type 147): invalid length message received (too short). I poked around a bit but not being too familiar with the java toolchain I was not able to debug it in 15 mins. I am thinking this might be something similar for someone familiar with Java.

micaz

High-level bit: everything works except for tosthreads/apps, which does not work at all. Most tosthreads/capps work; TestCollection and TestLogStorage do not.

tests/cc2420/LplUnicastPeriodicDelivery:

transmission very unreliable (few receptions)

tests/cc2420/TestPacketLink

README.txt should explain function of java class

micaz-safe

TBD

App Code

RadioCountToLeds: PASS RadioSenseToLeds: PASS TestSimComm: PASS, added script

TestPowerup - Complies with the naming conventions in TEP3. - Added a README.txt

TestPrintf - Complies with the naming conventions in TEP3. - Added a README.txt, updated source code documentation.

TestSerial - Complies with the naming conventions in TEP3. - Changed AM id to comply with TEP4. - README.txt is present and adequately describes the operation.