Difference between revisions of "T2-iMote2:Testing:May2008"
| Line 63: | Line 63: | ||
|} | |} | ||
| − | TestADC Failure Output: | + | |
| + | |||
| + | ====TestADC Failure Output:==== | ||
<pre> | <pre> | ||
$ make install intelmote2 | $ make install intelmote2 | ||
Revision as of 05:17, 31 May 2008
All LPL apps need to be modified to allow the LPL stack to install on the iMote2
| Application Name | Pass/Fail | |
|---|---|---|
| AntiTheft: Phil (note platform-specific) | Fails, I started editing it but I get some errors. | |
| BaseStation: Phil | Blinking receive light, haven't verified serial output | |
| Blink: Vlado | Pass | |
| Null: Phil | Pass | |
| Oscilloscope: Konrad | Works, however, no visualization under windows. Can someone else verify this? | |
| Powerup: Janos | Pass | |
| RadioCountToLeds: Mike | Pass | |
| RadioSenseToLeds: Mike | Pass | |
| tests/cc2420: David M | ||
| LplBroadcastCountToLeds | Fail - Bypassed LPL not supported message, does not count up on LEDs -- Why does this fail? | |
| LplBroadcastPeriodicDelivery | Pass- Bypassed LPL not supported message | |
| LplUnicastDeliver | Pass after bypassing LPL not supported on this platform check. | |
| RssiToSerial | Pass | |
| TxThroughput | Pass | |
| TestPacketLink | Pass | |
| TestAcks | Pass | |
| tests/deluge: Vlado | Fail | |
| tests/storage: Razvan | ||
| tests/TestAdc: Jan | Fail | |
| tests/TestAM: Kevin | Pass | |
| tests/TestArbiter: Kevin | ||
| TestFCFSArbiter | Pass | |
| TestRoundRobitArbiter | Pass | |
| tests/TestLPL: David M | Pass | |
| tests/TestPrintf: Phil | Fail | |
| tests/TestSerial: Miklos | Pass - And with the new Core Voltage it doesn't drop packets. | |
| tests/TestSimComm: Razvan | Tos Sim, haven't verified it... | |
| tests/TestSimTimer: Mike | Tos Sim, haven't verified it... |
TestADC Failure Output:
$ make install intelmote2
mkdir -p build/intelmote2
xscale-elf-gcc -c /cygdrive/c/motes/tinyos-2.x/tos/platforms/intelmote2/toscrt0
.s /cygdrive/c/motes/tinyos-2.x/tos/chips/pxa27x/pxa27x_util.s -o build/intelmot
e2/asms.o
compiling TestAdcAppC to a intelmote2 binary
ncc -o build/intelmote2/main.exe -Os -Wall -Wshadow -Wnesc-all -target=intelmote
2 -fnesc-cfile=build/intelmote2/app.c -board= -DDEFINED_TOS_AM_GROUP=0x22 -DIDEN
T_PROGRAM_NAME=\"TestAdcAppC\" -DIDENT_USER_ID=\"fspadini\" -DIDENT_HOSTNAME=\"h
ephaestus\" -DIDENT_USER_HASH=0xd6834c41L -DIDENT_UNIX_TIME=0x48414e5aL -DIDENT_
UID_HASH=0x11b739c2L -DPXA27X_13M -T/cygdrive/c/motes/tinyos-2.x/tos/platforms/i
ntelmote2/tos.x TestAdcAppC.nc -lm build/intelmote2/asms.o
In component `TestAdcAppC':
TestAdcAppC.nc:57: component DemoSensorNowC not found
TestAdcAppC.nc:57: component `DemoSensorNowC' is not generic
TestAdcAppC.nc:58: component DemoSensorStreamC not found
TestAdcAppC.nc:58: component `DemoSensorStreamC' is not generic
TestAdcAppC.nc:65: no match
TestAdcAppC.nc:66: no match
TestAdcAppC.nc:67: no match
make: *** [exe0] Error 1
