Difference between revisions of "Testing:2.1"

From TinyOS Wiki
Jump to: navigation, search
Line 20: Line 20:
 
   <td>Notes</td>
 
   <td>Notes</td>
 
</tr>
 
</tr>
−
<tr><td>AntiTheft</td>              <td> Phil      </td> <td bgcolor=red>?</td> <td></td>
+
<tr><td>AntiTheft</td>              <td> Phil      </td> <td bgcolor=green>PASS</td> <td></td>
−
<tr><td>BaseStation</td>            <td> Phil      </td> <td bgcolor=red>?</td> <td></td>
+
<tr><td>BaseStation</td>            <td> Phil      </td> <td bgcolor=green>PASS</td> <td></td>
 
<tr><td>Blink</td>                  <td> Vlado    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>Blink</td>                  <td> Vlado    </td> <td bgcolor=red>?</td> <td></td>
−
<tr><td>Null</td>                  <td> Phil      </td> <td bgcolor=red>?</td> <td></td>
+
<tr><td>Null</td>                  <td> Phil      </td> <td bgcolor=green>PASS</td> <td></td>
 
<tr><td>Oscilloscope</td>          <td> Konrad    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>Oscilloscope</td>          <td> Konrad    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>Powerup</td>                <td> Janos    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>Powerup</td>                <td> Janos    </td> <td bgcolor=red>?</td> <td></td>
Line 31: Line 31:
 
<tr><td>tests/deluge</td>          <td> Vlado    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/deluge</td>          <td> Vlado    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/storage</td>          <td> Konrad    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/storage</td>          <td> Konrad    </td> <td bgcolor=red>?</td> <td></td>
−
<tr><td>tests/TestAdc</td>          <td> Phil      </td> <td bgcolor=red>?</td> <td></td>
+
<tr><td>tests/TestAdc</td>          <td> Phil      </td> <td bgcolor=green>PASS</td> <td></td>
 
<tr><td>tests/TestArbiter</td>      <td> Kevin    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/TestArbiter</td>      <td> Kevin    </td> <td bgcolor=red>?</td> <td></td>
−
<tr><td>tests/TestFTSP</td>        <td> Phil      </td> <td bgcolor=red>?</td> <td></td>
+
<tr><td>tests/TestFTSP</td>        <td> Phil      </td> <td bgcolor=red>FAIL</td> <td>Violates TEP 3: FTSP -> Ftsp</td>
 
<tr><td>tests/TestLPL</td>          <td> David G.  </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/TestLPL</td>          <td> David G.  </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/TestPrintf</td>      <td> Janos    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/TestPrintf</td>      <td> Janos    </td> <td bgcolor=red>?</td> <td></td>
Line 48: Line 48:
 
<tr><td>TestTymo</td>              <td> Romain    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>TestTymo</td>              <td> Romain    </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/TestDissemination</td><td> Om        </td> <td bgcolor=red>?</td> <td></td>
 
<tr><td>tests/TestDissemination</td><td> Om        </td> <td bgcolor=red>?</td> <td></td>
−
<tr><td>tests/TestDIP</td>          <td> Phil      </td> <td bgcolor=red>?</td> <td></td>
+
<tr><td>tests/TestDIP</td>          <td> Phil      </td> <td bgcolor=red>FAIL</td> <td>DIP -> Dip, Hardcoded AM type (0xAB), m_test, testmsg, okbit, </td>
  
 
</table>
 
</table>

Revision as of 15:24, 27 June 2008

Testing results for 2.1.

RC2

  • micaZ: Phil L./David Gay
  • telos: Kevin/David Moss
  • intelmote2: Brano/?
  • tinynode: Maxime
  • eyesIFX: Jan H.
  • iris: Janos/Miklos
  • shimmer: Konrad/Vlado

The applications and their owners are as follows. This table denotes whether the application has been checked for its README and compliance with TEP 3 and TEP 4.

App Owner Status Notes
AntiTheft Phil PASS
BaseStation Phil PASS
Blink Vlado ?
Null Phil PASS
Oscilloscope Konrad ?
Powerup Janos ?
RadioCountToLeds Jan H. ?
RadioSenseToLeds Jan H. ?
tests/cc2420 David G. ?
tests/deluge Vlado ?
tests/storage Konrad ?
tests/TestAdc Phil PASS
tests/TestArbiter Kevin ?
tests/TestFTSP Phil FAIL Violates TEP 3: FTSP -> Ftsp
tests/TestLPL David G. ?
tests/TestPrintf Janos ?
tests/TestSerial Miklos ?
tests/TestSimComm Razvan ?
tests/TestSimTimer Mike ?
tests/tosthreads/apps Mike ?
tests/tosthreads/capps Razvan ?
tests/tkn154 Om ?
MViz Phil ?
MultihopOscilloscope Om ?
MultihopOscilloscopeLqi Om ?
TestNetwork Om ?
TestTymo Romain ?
tests/TestDissemination Om ?
tests/TestDIP Phil FAIL DIP -> Dip, Hardcoded AM type (0xAB), m_test, testmsg, okbit,

Platforms

micaZ (Phil + David G.)

App Standard Safe Notes
AntiTheft PASS ?
BaseStation PASS ?
Blink PASS ?
Null PASS ?
Oscilloscope PASS ?
Powerup PASS ?
RadioCountToLeds PASS ?
RadioSenseToLeds PASS ?
tests/cc2420 PASS?

tests/cc2420/LplUnicastPeriodicDelivery:

transmission very unreliable (few receptions)


tests/cc2420/TestPacketLink

README.txt should explain function of java class
tests/deluge PASS ?
tests/storage PASS ?
tests/TestAdc PASS ?
tests/TestArbiter PASS ?
tests/TestFTSP PASS ?
tests/TestLPL PASS ?
tests/TestPrintf PASS ?
tests/TestSerial PASS ?
tests/TestSimComm PASS ?
tests/TestSimTimer PASS ?
tests/tosthreads/apps FAIL ?
tests/tosthreads/capps FAIL ? All apps except TestCollection and TestLogStorage work.

micaz-safe

TBD

eyesIFX

AntiTheft: 

FAIL (platform not supported)

BaseStation: 

PASS , but too many bad packets over the serial line
"safe": PASS

Blink: 

PASS , "safe": PASS

Null: 

PASS, "safe": PASS

Oscilloscope: 

PASS
"safe": FAIL, starts toggling LED0 after a few seconds

Powerup: 

PASS, "safe": PASS

RadioCountToLeds: 

PASS,
"safe": FAIL, leds stay off (packets are not sent?)

RadioSenseToLeds: 

PASS,
"safe": FAIL, leds stay off (packets are not sent?)

tests/cc2420: 

not applicable

tests/deluge: 

 eyesIFX not supported

tests/storage/Block: 

  PASS, "safe": PASS

tests/storage/CircularLog: 

  PASS, "safe": FAIL (seems to cycle after ~ 60sec with LED1 toggling)

tests/storage/Config: 

  PASS, "safe": PASS

  warnings:
  /home/hanjo/tos/tinyos-2.x/tos/chips/at45db/ConfigStorageP.nc: In

function `ConfigStorageP$ConfigStorage$commit': 

  /home/hanjo/tos/tinyos-2.x/tos/chips/at45db/ConfigStorageP.nc:285:

warning: assignment from incompatible pointer type

tests/storage/Log: 

  PASS, "safe": PASS

tests/storage/SyncLog: 

  PASS, "safe": PASS

tests/TestAdc: 

   PASS, "safe": FAIL (LED2 is not turned on)

tests/arbiters: 

  TestFcfsArbiter:
      PASS, "safe": PASS
  TestRoundRobinArbiter:
      PASS, "safe": PASS

tests/TestFTSP: 

 FAIL (platform not supported)

tests/TestLPL: 

FAIL (platform not supported)

tests/TestPrintf: 

   PASS, "safe": PASS
  warnings:
      /home/hanjo/tos/tinyos-2.x/tos/interfaces/Queue.nc: In

function `PrintfP$Queue$dequeue': 

     /home/hanjo/tos/tinyos-2.x/tos/interfaces/Queue.nc:81: warning:

passing arg 1 of `CNonNull' makes pointer from integer without a cast

tests/TestSerial: 

  FAIL (The SF reports to have sent the packets from the host to the

mote, but no LEDs are toggled)

tests/TestSimComm: 

FAIL (platform not supported)

tests/TestSimTimer: 

 FAIL (platform not supported)

tests/tosthreads/apps/Blink: 

  FAIL
  error:
   BlinkC.nc:39: interface Thread not found

tests/tosthreads/capps/Blink: 

  FAIL
  error:
  msp430-gcc: .nc: No such file or directory

telos

apps/tests/tkn154/TestASSOCIATE

Pass

apps/tests/tkn154/TestDATA

Pass

apps/tests/tkn154/TestINDIRECT

Pass

apps/tests/tkn154/TestPROMISCUOUS

Pass README needs fixing: In README: the following lines: 

  $ cd $TOSDIR/../apps/tests/TestPrintf
  $ make telosb
  $ java PrintfClient -comm serial@/dev/ttyUSBXXX:telosb

should be replaced with: 

  $ java net.tinyos.tools.PrintfClient -comm serial@/dev/ttyUSB0:telosb

apps/tests/tkn154/TestSTARTSYNC

Pass

tosthreads/capps/Blink

Pass

tosthreads/capps/BaseStation

Pass

tosthreads/capps/Bounce

Pass

tosthreads/capps/Null

Pass

tosthreads/capps/RadioStress

Pass

tosthreads/capps/SenseAndSend

Pass

tosthreads/capps/SenseStoreAndForward

Pass

tosthreads/capps/TestCollection

Pass README needs to be fixed for the correct serialforwarder rate (57600 for telosb with threads)

tosthreads/capps/TestLogStorage

Pass

tosthreads/capps/TestPrintf

Pass

tosthreads/capps/TestSineSensor

Pass

tosthreads/capps/ThreadStress

Pass

tosthreads/apps/Blink

Pass

tosthreads/apps/BaseStation

Pass

tosthreads/apps/Bounce

Pass

tosthreads/apps/RadioStress

Pass

tosthreads/apps/TestBlockStorage

Pass

tosthreads/apps/TestCollection

Pass README needs to be fixed for the correct serialforwarder rate (57600 for telosb with threads)

tosthreads/apps/TestPrintf

Pass

tosthreads/apps/TestSineSensor

Pass


tests/TestSimTimer


tests/TestSimComm


tests/TestSerial


tests/TestPrintf


tests/TestLPL


tests/TestFTSP


tests/arbiters/TestRoundRobinArbiter


tests/arbiters/TestFcfsArbiter


tests/TestAdc


tests/storage/Block

tests/storage/CircularLog

tests/storage/Config

tests/storage/Log

tests/storage/SyncLog

tests/deluge/Blink

tests/deluge/Blink

tests/deluge/GoldenImage

tests/deluge/SerialBlink

tests/cc2420/TxThroughput


tests/cc2420/TestPacketLink


tests/cc2420/TestAcks


tests/cc2420/RssiToSerial


tests/cc2420/LplUnicastPeriodicDelivery


tests/cc2420/LplBroadcastPeriodicDelivery


tests/cc2420/LplBroadcastCountToLeds


RadioSenseToLeds


RadioCountToLeds


Powerup


Oscilloscope


Blink

Pass

BaseStation

Pass


TestNetwork

The simulation script (test.py) is not working - the nodes never find a route. You might want to customize this if TestNetwork is a part of the upcoming Collection simulation tutorial.

MultihopOscilloscope

When I try to run it, I am getting this error: receive error for OscilloscopeMsg (AM type 147): invalid length message received (too short). I poked around a bit but not being too familiar with the java toolchain I was not able to debug it in 15 mins. I am thinking this might be something similar for someone familiar with Java.

App Code

RadioCountToLeds: PASS RadioSenseToLeds: PASS TestSimComm: PASS, added script

TestPowerup - Complies with the naming conventions in TEP3. - Added a README.txt

TestPrintf - Complies with the naming conventions in TEP3. - Added a README.txt, updated source code documentation.

TestSerial - Complies with the naming conventions in TEP3. - Changed AM id to comply with TEP4. - README.txt is present and adequately describes the operation.

Retrieved from "http://tinyos.stanford.edu/tinyos-wiki/index.php?title=Testing:2.1&oldid=1377"