Difference between revisions of "Testing:2.1"
PhilipLevis (talk | contribs) (→micaZ (Phil + David G.)) |
PhilipLevis (talk | contribs) (→micaZ (Phil + David G.)) |
||
| Line 83: | Line 83: | ||
<tr><td>tests/TestFTSP</td> <td bgcolor=green>PASS</td> <td bgcolor=green>PASS</td> <td></td> | <tr><td>tests/TestFTSP</td> <td bgcolor=green>PASS</td> <td bgcolor=green>PASS</td> <td></td> | ||
<tr><td>tests/TestLPL</td> <td bgcolor=green>PASS</td> <td bgcolor=green>PASS</td> <td></td> | <tr><td>tests/TestLPL</td> <td bgcolor=green>PASS</td> <td bgcolor=green>PASS</td> <td></td> | ||
| − | <tr><td>tests/TestPrintf</td> <td bgcolor=green>PASS</td> <td bgcolor=red>FAIL</td> <td></td> | + | <tr><td>tests/TestPrintf</td> <td bgcolor=green>PASS</td> <td bgcolor=red>FAIL</td> <td><pre>/home/pal/src/tinyos-2.x/tos/lib/printf/avr_stdio.h:408: Warning: Type "struct __file *[0]" in global "__iob" contains an open array. |
| + | |||
| + | /home/pal/src/tinyos-2.x/tos/lib/printf/PrintfP.nc:79: Error: Type mismatch in coercion: | ||
| + | from: int ( __attribute__((__noinline__)) (* BND(...) ))(char c , struct __file * SAFE stream ) | ||
| + | to: int (* BND(...) )(char arg_0x403687c8 , struct __file * SAFE arg_0x403689b0 ) | ||
| + | exp: & uart_putchar | ||
| + | |||
| + | /home/pal/src/tinyos-2.x/tos/lib/printf/avr_stdio.h:408: Error: Global array __iob needs a length annotation (e.g. COUNT or NTS) | ||
| + | </pre></td> | ||
<tr><td>tests/TestSerial</td> <td bgcolor=green>PASS</td> <td bgcolor=green>NA</td> <td></td> | <tr><td>tests/TestSerial</td> <td bgcolor=green>PASS</td> <td bgcolor=green>NA</td> <td></td> | ||
<tr><td>tests/TestSimComm</td> <td bgcolor=green>PASS</td> <td bgcolor=green>NA</td> <td></td> | <tr><td>tests/TestSimComm</td> <td bgcolor=green>PASS</td> <td bgcolor=green>NA</td> <td></td> | ||
Revision as of 15:29, 1 July 2008
Testing results for 2.1.
Contents
RC2
- micaZ: Phil L./David Gay
- telos: Kevin/David Moss
- intelmote2: Brano/?
- tinynode: Maxime
- eyesIFX: Jan H.
- iris: Janos/Miklos
- shimmer: Konrad/Vlado
The applications and their owners are as follows. This table denotes whether the application has been checked for its README and compliance with TEP 3 and TEP 4.
| App | Owner | Status | Notes |
| AntiTheft | Phil | PASS | |
| BaseStation | Phil | PASS | |
| Blink | Vlado | ? | |
| Null | Phil | PASS | |
| Oscilloscope | Konrad | ? | |
| Powerup | Janos | ? | |
| RadioCountToLeds | Jan H. | PASS | |
| RadioSenseToLeds | Jan H. | PASS | |
| tests/cc2420 | David G. | ? | |
| tests/deluge | Vlado | ? | |
| tests/storage | Konrad | ? | |
| tests/TestAdc | Phil | PASS | |
| tests/TestArbiter | Kevin | ? | |
| tests/TestFTSP | Phil | FAIL | Violates TEP 3: FTSP -> Ftsp |
| tests/TestLPL | David G. | ? | |
| tests/TestPrintf | Janos | ? | |
| tests/TestSerial | Miklos | ? | |
| tests/TestSimComm | Razvan | PASS | |
| tests/TestSimTimer | Mike | ? | |
| tests/tosthreads/apps | Mike | ? | |
| tests/tosthreads/capps | Razvan | PASS | |
| tests/tkn154 | Om | ? | |
| MViz | Phil | FAIL | Violates TEP 3: uartlen, sendbuf, uartbuf, sendbusy, uartbusy, fatal_problem, report_problem, report_sent, report_received, suppress_count_change |
| MultihopOscilloscope | Om | ? | |
| MultihopOscilloscopeLqi | Om | ? | |
| TestNetwork | Om | ? | |
| TestTymo | Romain | ? | |
| tests/TestDissemination | Om | ? | |
| tests/TestDIP | Phil | FAIL | Violates TEP 3: DIP -> Dip, Hardcoded AM type (0xAB), m_test, testmsg, okbit, |
Platforms
micaZ (Phil + David G.)
| App | Standard | Safe | Notes |
| AntiTheft | PASS | PASS | |
| BaseStation | PASS | PASS | |
| Blink | PASS | PASS | |
| Null | PASS | PASS | |
| Oscilloscope | PASS | PASS | |
| Powerup | PASS | PASS | |
| RadioCountToLeds | PASS | PASS | |
| RadioSenseToLeds | PASS | PASS | |
| tests/cc2420 | PASS | PASS |
tests/cc2420/LplUnicastPeriodicDelivery: transmission very unreliable (few receptions)
|
| tests/deluge | PASS | ? | |
| tests/storage | PASS | PASS | |
| tests/TestAdc | PASS | PASS | |
| tests/TestArbiter | PASS | PASS | |
| tests/TestFTSP | PASS | PASS | |
| tests/TestLPL | PASS | PASS | |
| tests/TestPrintf | PASS | FAIL | /home/pal/src/tinyos-2.x/tos/lib/printf/avr_stdio.h:408: Warning: Type "struct __file *[0]" in global "__iob" contains an open array.
/home/pal/src/tinyos-2.x/tos/lib/printf/PrintfP.nc:79: Error: Type mismatch in coercion:
from: int ( __attribute__((__noinline__)) (* BND(...) ))(char c , struct __file * SAFE stream )
to: int (* BND(...) )(char arg_0x403687c8 , struct __file * SAFE arg_0x403689b0 )
exp: & uart_putchar
/home/pal/src/tinyos-2.x/tos/lib/printf/avr_stdio.h:408: Error: Global array __iob needs a length annotation (e.g. COUNT or NTS)
|
| tests/TestSerial | PASS | NA | |
| tests/TestSimComm | PASS | NA | |
| tests/TestSimTimer | PASS | NA | |
| tests/tosthreads/apps | FAIL | FAIL | No unsafe apps work. Safe fails on /tmp/ccchqUUK.o: In function `ThreadSleepP$ThreadSleep$sleep': cil-eXmx1N94.cil.c:(.text+0x8bc): undefined reference to `__deputy_memset' cil-eXmx1N94.cil.c:(.text+0x8cc): undefined reference to `__deputy_memset' |
| tests/tosthreads/capps | FAIL | FAIL | All apps except TestCollection and TestLogStorage work in unsafe. Safe fails on /tmp/ccSQd3PE.o: In function `tosthread_sleep': cil-VrbO6t7r.cil.c:(.text+0xc20): undefined reference to `__deputy_memset' cil-VrbO6t7r.cil.c:(.text+0xc30): undefined reference to `__deputy_memset' |
eyesIFX
| App | Standard | Safe | Notes |
| AntiTheft | FAIL | FAIL | platform not supported |
| BaseStation | PASS | PASS | too many bad packets over the serial line |
| Blink | PASS | PASS | |
| Null | PASS | PASS | |
| Oscilloscope | PASS | FAIL | safe: starts toggling LED0 after a few seconds |
| Powerup | PASS | PASS | |
| RadioCountToLeds | PASS | FAIL | "safe": leds stay off (packets are not sent?) |
| RadioSenseToLeds | PASS | FAIL | "safe": leds stay off (packets are not sent?) |
| tests/cc2420 | FAIL | FAIL | not applicable |
| tests/deluge | FAIL | FAIL | platform not supported |
| tests/storage | PASS | FAIL |
tests/storage/CircularLog: "safe": FAIL (seems to cycle after ~ 60sec with LED1 toggling)
warnings: |
| tests/TestAdc | PASS | FAIL | "safe": LED2 is not turned on |
| tests/TestArbiter | PASS | PASS | |
| tests/TestFTSP | FAIL | FAIL | platform not supported |
| tests/TestLPL | FAIL | FAIL | platform not supported |
| tests/TestPrintf | PASS | PASS |
warnings: /home/hanjo/tos/tinyos-2.x/tos/interfaces/Queue.nc: In |
| tests/TestSerial | FAIL | FAIL | The SF reports to have sent the packets from the host to the mote, but no LEDs are toggled |
| tests/TestSimComm | FAIL | FAIL | platform not supported |
| tests/TestSimTimer | FAIL | FAIL | platform not supported |
| tests/tosthreads/apps | FAIL | FAIL | error: BlinkC.nc:39: interface Thread not found |
| tests/tosthreads/capps | FAIL | FAIL | error: msp430-gcc: .nc: No such file or directory |
telos (Kevin Klues & David Moss)
| App | Standard | Safe | Notes |
| AntiTheft | FAIL | FAIL | platform not supported |
| BaseStation | PASS | ? | |
| Blink | PASS | ? | |
| Oscilloscope | ? | ? | |
| Powerup | ? | ? | |
| RadioCountToLeds | ? | ? | |
| RadioSenseToLeds | ? | ? | |
| tests/cc2420/LplBroadcastCountToLeds | ? | ? | |
| tests/cc2420/LplBroadcastPeriodicDelivery | ? | ? | |
| tests/cc2420/LplUnicastPeriodicDelivery | ? | ? | |
| tests/cc2420/RssiToSerial | ? | ? | |
| tests/cc2420/TestAcks | ? | ? | |
| tests/cc2420/TestPacketLink | ? | ? | |
| tests/cc2420/TxThroughput | ? | ? | |
| tests/deluge/SerialBlink | ? | ? | |
| tests/deluge/GoldenImage | ? | ? | |
| tests/deluge/Blink | ? | ? | |
| tests/storage/SyncLog | ? | ? | |
| tests/storage/Log | ? | ? | |
| tests/storage/Config | ? | ? | |
| tests/storage/CircularLog | ? | ? | |
| tests/storage/Block | ? | ? | |
| tests/TestAdc | ? | ? | |
| tests/arbiters/TestFcfsArbiter | ? | ? | |
| tests/arbiters/TestRoundRobinArbiter | ? | ? | |
| tests/TestFTSP | ? | ? | |
| tests/TestLPL | ? | ? | |
| tests/TestPrintf | ? | ? | |
| tests/TestSerial | ? | ? | |
| tests/TestSimComm | ? | ? | |
| tests/TestSimTimer | ? | ? | |
| tosthreads/apps/Blink | Pass | ? | |
| tosthreads/apps/BaseStation | PASS | ? | |
| tosthreads/apps/Bounce | PASS | ? | |
| tosthreads/apps/RadioStress | PASS | ? | |
| tosthreads/apps/TestBlockStorage | PASS | ? | |
| tosthreads/apps/TestCollection | PASS | ? | README needs to be fixed for the correct serialforwarder rate (57600 for telosb with threads) |
| tosthreads/apps/TestPrintf | PASS | ? | |
| tosthreads/apps/TestSineSensor | PASS | ? |
apps/tests/tkn154/TestASSOCIATE
Pass
apps/tests/tkn154/TestDATA
Pass
apps/tests/tkn154/TestINDIRECT
Pass
apps/tests/tkn154/TestPROMISCUOUS
Pass README needs fixing: In README: the following lines:
$ cd $TOSDIR/../apps/tests/TestPrintf $ make telosb $ java PrintfClient -comm serial@/dev/ttyUSBXXX:telosb
should be replaced with:
$ java net.tinyos.tools.PrintfClient -comm serial@/dev/ttyUSB0:telosb
apps/tests/tkn154/TestSTARTSYNC
Pass
tosthreads/capps/Blink
Pass
tosthreads/capps/BaseStation
Pass
tosthreads/capps/Bounce
Pass
tosthreads/capps/Null
Pass
tosthreads/capps/RadioStress
Pass
tosthreads/capps/SenseAndSend
Pass
tosthreads/capps/SenseStoreAndForward
Pass
tosthreads/capps/TestCollection
Pass README needs to be fixed for the correct serialforwarder rate (57600 for telosb with threads)
tosthreads/capps/TestLogStorage
Pass
tosthreads/capps/TestPrintf
Pass
tosthreads/capps/TestSineSensor
Pass
tosthreads/capps/ThreadStress
Pass
TestNetwork
The simulation script (test.py) is not working - the nodes never find a route. You might want to customize this if TestNetwork is a part of the upcoming Collection simulation tutorial.
MultihopOscilloscope
When I try to run it, I am getting this error: receive error for OscilloscopeMsg (AM type 147): invalid length message received (too short). I poked around a bit but not being too familiar with the java toolchain I was not able to debug it in 15 mins. I am thinking this might be something similar for someone familiar with Java.
App Code
RadioCountToLeds: PASS RadioSenseToLeds: PASS TestSimComm: PASS, added script
TestPowerup - Complies with the naming conventions in TEP3. - Added a README.txt
TestPrintf - Complies with the naming conventions in TEP3. - Added a README.txt, updated source code documentation.
TestSerial - Complies with the naming conventions in TEP3. - Changed AM id to comply with TEP4. - README.txt is present and adequately describes the operation.
